Home - Returns - Privacy - Shipping
The Scope RXSERUSA is a Fixed Frequency, 4 Relay, POCSAG paging data receiver. Each Relay can be Latched, Toggled or Momentary closure. The unit can be programmed to receive all Addresses or just a specific address. The RXSER has a 9 pin serial port for output of data for logging or activating other equipment.
The Scope RX10 is a Fixed Frequency, 10 Relay , POCSAG paging data receiver. Each Relay can be Latched, Toggled or Momentary closure. The front panel LEDs indicate when each relay is energized. The unit can be reset by a front panel key switch if receiving data does not function. The RX10 also provides a 9 pin serial port for output of data for logging or activating other equipment.
The RCR100 is a paging receiver that controls the function of a Form C Relay. The relay can be Latched or Momentary. The Relay will respond to different codes to activate and deactivate.
The Invovonics™ FA401R receiver is programmable for one wireless transmitter input and one form C relay output.
The Invovonics™ FA416R receiver is programmable for up to 16 wireless transmitter inputs. Each of the transmitters can be programmed to activate one of the 4 form C relay outputs. Relays can be programmed for Latching, Following or Momentary.
